**************************************************************
VAS GROUP Inc. -- RTC WINDOWS 1.0 -- README.TXT version rtw2.2
**************************************************************

<<Installation>>

RTC WINDOWS software allows the complete control of all the functions available 
from the RTC front panel from any computer with Microsoft Windows.

The RTC can be controlled from com port 1, 2, 3, or 4.  Use a standard
null modem RS-232 cable to connect your computer to the RS-232 port on the 
back panel of the RTC.  Follow the instructions below to setup your RTC to 
communicate with your computer.

1- Port type set at RS-232
2- Port flow set at none
3- Beginning of line string set at none
4- End of line string set at none

To install the program follow the instructions below.

<Windows 3.1 users>
1- From File Manager create a new directory called "rtcwin"
2- Copy all the files on the floppy disk to the "rtcwin" directory
3- From program manager choose new, select program item then choose browse
        and select "rtcwin.exe" from the rtcwin directory
4- Choose change icon to select the V.A.S. Group logo icon
5- Click on the icon to run RTC Windows

<Windows 95 users>
1- Create a new folder called rtcwin
2- Copy all the files on the floppy disk to the folder (rtcwin.exe and all 
         6 dll files to the rtcwin directory)
3- Click on the vas group logo icon to run RTC Windows


<<Notes>>

RTC Windows version 1.0 allows the user to control all the functions 
of RTC scan converters available with firmware 2.4 and lower.

New RTC firmware 3.1 functions are not supported. In addition, focus filter
functions will not work properly.

The firmware version of your RTC is displayed on the LCD upon power-up.    


<<Technical Support>>

VAS Group Inc.
4525 Valerio St.
Burbank, CA 91505  
USA

Tel. (818) 843-4831
Fax. (818) 843-6544

support@vasgroup.com
www.vasgroup.com


